SELLING: ALPS Motorfaders, ALPS Encoders, Midibox CV, GM5 Interfaces, etc.

[snykehd]

[ S O L D ]

 

Hi there!

In 2007 I did a bulk-order for ALPS Motorfaders and bought some circuit boards and other parts to build two MidiBox LC (6 Ch and 20Ch).
For more than 5 years I didn't get to build those Boxes, now I have a lot of spare parts lying around that I'd like to get rid of.

I'm keeping some parts, just in case and sell those other parts:

 

PUSH-Encoder ALPS EC11E15244BY - à 0,90 €

 

 

Motorfader ALPS RSAON (10k) - à 15,- €

Each incl: 1x plastic cap AND 1x silver touch cap!

 

 

MBHP_MF (R2) Modules - à 5,- €

Core (R4D)Modules - à 5,- €
DINx4 (R5) Modules - à 5,- €
DOUTx4 (R5) Modules - à 5,- €
AINx4 (R4) Modules - à 5,- €

 

 

GM5 MIDI Interfaces with GM5 Chip - à 5,- €


MidiBox CV KIT incl. ICs - 30,- €

Each kit incl: 1x PIC 18F452-I/P and 2x MAX 525 BCPP




If you're interrested, drop me an email at midibox@phinemedia.de

Payments via bank transfer or paypal ( +1,9% +0,35 € ).

Shipping will be from germany.

 

I'd be happy to help you out!

 

 

Best regards,

Paul

Edited August 1, 2013 by snykehd

[John E. Finster]

I´l take 4 DINs and 2 DOUTs. Just send you an Email.

 

Thank you

Edited January 16, 2013 by JEFinster

[latigid on]

Hi, sorry to hijack, but your encoders are more expensive than Pollin

 

http://www.pollin.de/shop/dt/MDY2OTU3OTk-/Bauelemente_Bauteile/Passive_Bauelemente/Potis_Trimmer_Encoder/Encoder_ALPS_EC11E15244BY.html

[freddy]

Hi,

 

I'll take two cores, remaining DIN and two DOUTs. 2007 - which core PCB revision was that?

 

Cheers,

Adrien

[ilmenator]

Hi, sorry to hijack, but your encoders are more expensive than Pollin

 

http://www.pollin.de/shop/dt/MDY2OTU3OTk-/Bauelemente_Bauteile/Passive_Bauelemente/Potis_Trimmer_Encoder/Encoder_ALPS_EC11E15244BY.html

 

I saw that as well, but Pollin is sold out... More noteworthy is the fact that the footprint is different from the Bourns encoders, and that the shaft length is 5mm shorter. That needs to be considered before buying!

[snykehd]

Oh, I didn't see that. You can have the encoders for 0.90 € - i bought them for 1.00 € each and never unpacked them.

 

The curcuit boards are from smashtv. revisions are

 

CORE_R4D,

AIN_R4,

DIN R5,

DOUT R5,

MBHP_MF_R1

[eptheca]

I would like the 3 GM5 with chips please :)

email sent as well

[EsotericLabs]

I'll take 20 encoders. Mailed you!

[rmouneyres]

i'll take 8 motorfaders and 1 MF board, mailing now

[snykehd]

I just dropped off all ordered MidiBox Parts at the post office.

There are still 16 ALPS Motorfaders, 2x MBHP_MF Boards and 20 ALPS Push-Encoders left! :smile:

 

 

Best regards,

Paul

Edited January 28, 2013 by snykehd

[John E. Finster]

the boards arrived today. everything peachy...

thanks for the boards and for this pleasant transaction.

Edited January 18, 2013 by JEFinster

[freddy]

Mine arrived as well, thanks a lot!

[dgrr57]

I would like the 20x PUSH-Encoder ALPS EC11E15244BY please.

email sent as well.

[henkmeid]

Still got the motorfaders?