SLP

Now that's what i call chiptune :D http://www.sputnik-booster.de/ (new album can be downloaded for free) Sputnik Booster makes the music and the Future Posers wear trashy robot costumes and dance with the party crowd. He played at the "Agrat am Agatha" festival (just in case anyone has ever heard of it) (unforuntately I wasn't there...)

edit: alright... you prpbably meant Sputnik Booster ;) -> new thread in the songs&sounds folder

I'm sure I understand that sentence *pretty* wrong... *whack*

Awesome!!! :D :D That's exactly what I've been waiting for since I've built my MB_SID :D Thanks TK! Thanks Rutger!

let the *** burn

PICS! NOW! ;D

UV-Radiation? ;D

I don't know why you need the external connectors. Do you need them for external Banksticks? In this case you only need 4 pins for each IC: +5V, GND, And the 2 data lines. This could decrease the size of your board edit: had a closer look. I think I know now what you're wanting to do.

Rasteri has built a scratch-capable crossfader. you can see that in the youtube video (though the sound is not in sync with the video, but that's a known youtube problem). So done84 could just ask rasteri how he did that. The thread is named "scratch wheel" because rasteri didn't want to stop at that point, but move on to a scratchwheel.

here you go: http://www.midibox.org/forum/index.php/topic,11167.0.html just use the "search" function of the forum

Why didn't you tell me that yesterday *before* nILS and Wilba made fun of me ? ;D ;D

If you're running Windows you've got to take care that you use upper-case letters only: /PART

Erstmal ein herzliches Willkommen! :D sowas is natürlich realisierbar. Mit der MidiboxHardwarePlatform (MBHP) ist so ziemlich alles möglich. Ein paar Leute arbeiten schon an der Midibox zur Übernahme der Weltherrschaft. Aber ich glaube das dauert noch etwas bis die fertig ist. ;D Am besten liest du einfach mal das Wiki durch. Da erfährst du alles was nötig ist, um dir deinen Wunschmidibox zu basteln. Gruß matthias

just try to put a resistor in series with your PSU: +16V------R-----GND Then measure again. I think the voltage should drop.

that's correct. But I think that the 16V will drop to 14V as soon as there's some load hanging on it. But take care of the electrolytic capacitors. AFAIK the ones used in your project are rated at 16V maximum (but I'm not sure about that), so take care. If you exceed the maximum voltage (or connect them with the wrong polarisation) electrolytic capacitors will explode! And you don't want that those toxic and highly corrosive acids in your face/eyes. And of course tha bang wil be pretty loud. matthias

no problem with a good PCB and a proper soldering tip / desoldering tool

So Access was the thief? ;D ...And why do I always change NI with NI? ;D

http://www.tweakbox.de/ It's a new DIY Project made by the guys that also did the ML-303. It's another TB-303 "clone" ("emulation" would fit better here), but it's completely digital and uses 2 PICs. So soldering is easier and it "could" be implemented in a midibox.

nice :) I've heard that you'll do the tweakbox panels once it's released! ;)

AWESOME :D :D "MB-SID TI" (yep. i've stolen the "TI" from Access ;))

that's sad. with the new GM5-USB-MIDI-Interface someone should program some editor and patch librarian software. Something like the software for the Roland SH-201 which works pretty well.

NICE :D :D really awesome! you could try to find some smaller knobs instead of building a second box for them.

anmerkung am rande: es heißt "to delete" ;)

Die 5,3V liegen noch im Toleranzbereich. Und da war noch die Sache mit dem Strom... I=U/R Wenn dein Core nur 350mA zieht passt das doch. Das sagt ja nichts darüber aus wieviel das NT maximal leisten kann. Wird ja nicht alles benötigt. Wenn du aber z.B. noch mehrere DOUTs hinhängst könnte der Stromverbrauch der MB die 500mA übersteigen. dann wird wahrscheinlich die Spannung des NTs zusammenbrechen. Bis jetzt dürfte aber alles passen. Ich denke Du hast auch drangedacht den Spannungsregler zu brücken. den brauchst du ja nicht wenn du gleich mit 5V reingehst. Außerdem solltest du evtl. den Gleichrichter brücken. an dem gehen auch immer ein paar hundert mV verloren. regards matthias

It's a quite cheap one. http://www.reichelt.de/?;ACTION=3;LA=2;GROUP=D41;GROUPID=590;ARTICLE=64753;START=0;SORT=artnr;OFFSET=16;SID=326PwKX6wQASAAAGAKOrwbf361da4186c1fd28407a28ac39903f8