Dual SSM2044 PCB Bulk Order

[Goblinz]

Count me in.... again :D

[mrcam]

Right! the price per unit is not that cheap. I am interested by a styroflex bulk order (need to fill 4 pcbs... 24 x 10nF + 8 x 820pF).

[lukas412]

I am interested by a styroflex bulk order (need to fill 4 pcbs... 24 x 10nF + 8 x 820pF).

I'm in, need the same as above.

Luke

[amp1ron]

Right! the price per unit is not that cheap. I am interested by a styroflex bulk order (need to fill 4 pcbs... 24 x 10nF + 8 x 820pF).

If there's an order, I'm in for enough for 5 boards plus two spares of each: 32 x 10nF and 12 x 820pF

[jimh54]

Doug,

I sent the email to dougwellington@gmail.com. All it said was whether or not I'm on the list for ssm2044s. I have boards built and only need those to complete them. It's been a really long time since I've heard anything and I just want to be sure. Good luck with the marrow donations. I did not mean to imply that you were not reliable. thanks.

[cimo]

..is there a bulk order for DW s marrow?

[Goblinz]

Count me in, I need some in red for my MB-6582 and some in green for my sequencer.

[TheAncientOne]

Looks like we have 2 options for Polystyrene caps:

Lower accuracy, (5%), working out at £1.80 per board, (6x10nF 2 x 820pF),

or precision (1%) working out at £8.60 per board.

Carriage on top.

I priced for 50 boards here. I can't get a better price on the 1% ones unless I buy 1000 off - which means I need to order 167 boards worth.

I've priced in UK £'s because of the state of the currency: it keeps my sums right, and people might get a better deal.

So, it's up to people on the group: I need at least 50 people who want a kit, and a decision about which caps to get. I'll do 1 batch, and only 1 type.

Just a thought: should I try to get a bulk for the relays?: I don't think they are that common an item either.

[Kartoshka]

Right! the price per unit is not that cheap. I am interested by a styroflex bulk order (need to fill 4 pcbs... 24 x 10nF + 8 x 820pF).

5% caps is fine. thanks for offer!

[mrcam]

Lower accuracy, (5%), working out at £1.80 per board, (6x10nF 2 x 820pF),

or precision (1%) working out at £8.60 per board.

ok, we just need 12v ones? i saw cheap chips but 50v 5% version (and others up to 160v), is that ok or did i miss something?

[Goblinz]

Looks like we have 2 options for Polystyrene caps:

Lower accuracy, (5%), working out at £1.80 per board, (6x10nF 2 x 820pF),

or precision (1%) working out at £8.60 per board.

Carriage on top.

I priced for 50 boards here. I can't get a better price on the 1% ones unless I buy 1000 off - which means I need to order 167 boards worth.

I've priced in UK £'s because of the state of the currency: it keeps my sums right, and people might get a better deal.

So, it's up to people on the group: I need at least 50 people who want a kit, and a decision about which caps to get. I'll do 1 batch, and only 1 type.

Just a thought: should I try to get a bulk for the relays?: I don't think they are that common an item either.

Any ideas on what effect the tolerance would have on the sound? Would the 5% add a bit of dirt?

A relay bulk would be appreciated, it makes things a lot easier (maybe not for you tho!)

[Doug Wellington]

I sent the email to dougwellington@gmail.com.

Gmail?  Ugh...  If you want to contact me directly, please use my midiboxaddict address...

[diablojoy]

rush online have the correct values in polystyrene from 49 pence each for  1% tolerance

and in silver mica also 1 % from 85 pence each they were very good to deal with. received within

two weeks in australia. hope this helps

www.rush-on-line.co.uk]

[TheAncientOne]

Thanks very much for that link - I think they will solve a whole bunch of problems for me in particular, they have the Suflex caps I want for my Neve 1084 clone as well

Your google-fu is strong, (or however you found it!).

[Kartoshka]

trying to order 4 sets of (820pF x2 + 10nF x6) bills my paypal for 15.68gbp with 8.5gbp postage.

total of 24.18.

worth it? or there's better pricing somewhere...  8) ?

[stryd_one]

Your google-fu is strong,

True, bookmarked, thanks!!

[diablojoy]

happy to help out  :)

google-fu ?

nah just got lucky and a high perservance factor

I was chasing 1000pf silver mica 1% for a bunch of oscilators

and came across that site in my endless wanderings i think it was buried deep under

the eleventyth page i looked at . had to open a good bottle [ bourbon ] when i found it to celebrate

everywhere else was way dearer or ex russian military requiring a crane and dogman to shoehorn into place

btw for any that may not be aware  polystyrene caps are quite heat sensitive and i would recommend the use of

an alligater clip on the leads while soldering especially on the short lead when vertically mounting them as on these boards.

 

[Filch]

Gmail?  Ugh...  If you want to contact me directly, please use my midiboxaddict address...

And that address at midiboxaddict would be.....????    ;)

[jackies]

I, too was wondering about ssm2044 usa distribution.

???

[Filch]

I was part of the board/chip group buy from the start,  I got my boards. Now the chips are available and Wilba informs me that Mr Wellington is handling the US chips. I sent gmail and pm, no response yet, I don't know what the midibox addy is

[jimh54]

As instructed by Doug; see the little icon on the lower left of any of Doug's posts? that is how to contact him. He's in California right now donating Bone Marrow, so give him a break. He told me He'd get it done as soon as he gets back home.

[stryd_one]

He's in California right now donating Bone Marrow, so give him a break

HAH!! (get it?)

[TheAncientOne]

He's in California right now donating Bone Marrow. . . . .

I wonder if there is any evidence for genetic transmission of aptitude. I have this vision of the receiver of the transplant waking up with a puzzling desire for a soldering iron.

Or even more serious; "The Knack"

http://uk.youtube.com/watch?v=FlJsPa6UwcM&feature=related

[stryd_one]

LOL!!

[Doug Wellington]

Hiya guys!  I'm back from the bone marrow donation.  Everything went well, and today (the 24th) the recipient is getting his infusion!  Send your good thoughts his way...

I don't have to work between Christmas and the new year, so I'll be sending out invoices and shipping everything during that time.  (I've got a lot of catching up to do, please bear with me!)