orange_hand

Hey Peter, the video as well as the track are absolutely amazing ! Cheers orange

Hi, ich hatte neulich welche im hier im Sales Corner, die standen ewig. Dann kaufte auf einmal einer alle auf. Die Sid's waren alle getestet. Da verstehe ich nicht wieso man da nicht zuschlaegt, wenn man Sid's braucht. Greetz orange

I am currently at this stage :-) Made the mistake and used flat top LED's, terrible. Especially if you have to disassemble the control surface again, like I had to :-( Good luck anyway :-) Cheers orange

Sold out, thanks !

8 SID's are on the way to the US. 4 Sid's are left.

great work !

Hi, my 30 knobs arrived yesterday. Thanks to kristal= for the excellent service. Cheers orange

Hehe, this is just another common case of "midlife crisis" :-)

Hi, according to the data sheet attached, the wiring of your LCD is exactly the same as the once I used. Please note that my mapping table is for the CORE32, not sure if the LPC17 has got exactly the same allocations on its connector. If so, you can use the mapping 1:1... Good luck :-) Cheers orange

Hi, you want to check this out: Most of the displays are identically, especially the 2x40 as there are not some many different on the market compared to the 4x20... For further support, please post the data sheet of your display... You can search via your preferred search engine using the ID's on the back of your display. Also the shop where you bought them should have a data sheet. Cheers orange

Hi, I am currently looking for some Waldorf style knobs / Albs knobs in: - red - white - green All offers are welcome :devil:

There are still ten SID's left, fully tested and working. Prices will be raised before X-Mas, so secure your batch now :flowers: !!

I have already ordered a set from SmashTV, so I am stuffed for the time being.

My experience so far: 09.08 Inquiry and order at kristal= :poke: 09.08 Order (Quantity) confirmation :geek: 13.08 Payment request received :fear: 14.08 Paid + Funds cleared :w00t: 14.08 Shipping notification :devil: So far, nothing to complain about :super:

Hi, what kind of colours have you ordered ? Only one or can you offer different ? Cheers orange

Hi, I would try to get a desoldering iron in order to get the Sid out without a damage. You can then test them in a C64 with a socket for the Sid. Also there is th NAFTA (north america free trade asgreement) in place. Check out if there is any import Vat (GST, HST, QST, PST, FNT... hehe) or duty on electronic parts. Cheers orange

word ! I am also in for 100 knobs, there is only one bulk order per year :tongue:

Hi, I would go for: 30 red 40 white 30 black transparent 30 green (if available) Cheers orange

Hi, check this out. I use the regular C64 power plug in my MB6582. Cheers orange

First tests with some components are fine, but where is my control surface !?!? :-) Cheers orange

I was able to load the SEQV4 firmware to the Core32 after the selection of the appropriate device "00" [not "01" :-)] But thanks for looking indeed :-) Cheers orange

Hi, Today I tried to load the SEQV4 firmware into the CORE32 but there was no response. The USB connection was established and the MIOS Studio stated that the core is ready for the upload. I started the upload of the "project.hex" but there was no response from the core. MIOS Studio dumped a warning into the message log: Do I need to set a specific jumper in order to upload the firmware. I read the manual a couple of times but I couldn't really find an advice. Cheers orange

Thanks guys for the explanation ! Cheers orange

LOL... manchmal helfen die einfachen Dinge im Leben :-)

Hi, I am wondering what I need to do in order to enable the LED's for the MIDI in's and out's on the CORE32, like it is realized on the IIC board. When I read the documentation a couple of weeks ago I found somewhere an explanation, but I can't retrieve it. The only thing I remember is that it has to be in parallel to the MIDI connectors ... Can anyone help me out with a small schematic ? Cheers orange