damnit Posted March 28, 2012 Report Share Posted March 28, 2012 Added myself to the list. Thanks for the time you'll spend for us. Quote Link to comment Share on other sites More sharing options...
toneburst Posted March 29, 2012 Report Share Posted March 29, 2012 Hiya, just wondering how far you've got through the list, SmashTV. My name is down, but quite far down the list, so was wondering if you've not got to me, or if perhaps there was some other issue. I do have an email address on my profile, but it's not publicly-visible (i.e. you can drop me a message via the contact form, but can't actually see my address). Is this OK? I'd actually forgotten about this one (put my name down some time ago), but I'm still interested. Is there any news on backordered parts, by the way? I'm not in a huge hurry, but it would be good to have an idea of how long things might take, if I haven't now missed the boat entirely, of course. Cheers, a|x Quote Link to comment Share on other sites More sharing options...
VCH1002 Posted March 30, 2012 Report Share Posted March 30, 2012 i put myself on the list for pcb and a kit. i hope things continue... cant wait to build my seq. kind regards VCH1002 Quote Link to comment Share on other sites More sharing options...
toneburst Posted April 11, 2012 Report Share Posted April 11, 2012 It's all gone verrrrrry quiet.... a|x Quote Link to comment Share on other sites More sharing options...
smashtv Posted April 11, 2012 Report Share Posted April 11, 2012 It's all gone verrrrrry quiet.... a|x Quiet just means I am more focused on getting things done than providing personalized answers about the wiki list. ;) I am shipping SEQ kits just as I have been for months, with some breaks when parts go temporarily unavailable. Unfortunately back ordered parts are a post-econofail reality, but that is slowly getting better...... sometimes it's the bicolor LED, sometimes the switch cap, etc. but the lead times seem to be shorter each time all the distributors run out of a crucial kit part. To be clear for everyone on the list: Just like it says on the wiki page, I am actively making and shipping SEQ kits and when I have one ready for you I will let you know. If I don't see a reply within 7 days I offer that kit to one of the next names on the list. If for some reason this changes I will write about it on the wiki page. Best regards Tim Quote Link to comment Share on other sites More sharing options...
Altitude Posted April 11, 2012 Report Share Posted April 11, 2012 mmm, quad IIc Quote Link to comment Share on other sites More sharing options...
toneburst Posted April 11, 2012 Report Share Posted April 11, 2012 Thanks for the reply, smashtv. I am reassured. I wasn't implying that you weren't doing anything, incidentally. Having done a couple of component 'bulk orders' in the past, I know how long all this can take. a|x Quote Link to comment Share on other sites More sharing options...
mastomo Posted April 12, 2012 Report Share Posted April 12, 2012 hi everyone, my name is on this wiki list since a long time. i'm not in a hurry, just wanted to know about the "new format" do i need to put my name again ? or does my "old" entry is still OK ? good day to you, reader :flowers: Quote Link to comment Share on other sites More sharing options...
smashtv Posted April 12, 2012 Report Share Posted April 12, 2012 I wasn't implying that you weren't doing anything, incidentally.No worries.... I did not read it that way. :) do i need to put my name again ?No. The "old" entry is OK. The new list format reflects the difference between the original offer (unworkable due to the effort required for hundreds of order variants and the age of the list) to the PCB only or PCB + parts kit options I have now. Best regards Tim Quote Link to comment Share on other sites More sharing options...
Macotronic Posted June 9, 2014 Report Share Posted June 9, 2014 Hi I want to be in the list for a KIT please Thanks Quote Link to comment Share on other sites More sharing options...
ilmenator Posted June 9, 2014 Report Share Posted June 9, 2014 Necrobump alert! This thread is more than two years old and the info kind of obsolete. Go to Tim's (aka SmashTV's) webshop and order the PCB there! Quote Link to comment Share on other sites More sharing options...
kristal= Posted June 9, 2014 Report Share Posted June 9, 2014 Hi I want to be in the list for a KIT please You might also want to check out these two threads: http://www.midibox.org/dokuwiki/doku.php?id=kristal#important_seq4_pages Quote Link to comment Share on other sites More sharing options...
stevenclements Posted March 12, 2017 Report Share Posted March 12, 2017 (edited) I would LOVE to get one I want this sequencer for YEARS pretty please Edited March 12, 2017 by stevenclements spelling mistake Quote Link to comment Share on other sites More sharing options...
jaytee Posted March 12, 2017 Report Share Posted March 12, 2017 2 hours ago, stevenclements said: I would LOVE to get one I want this sequencer for YEARS pretty please This is a five year old thread. You'll have to wait for them to come back in stock at @smashtv's shop like the rest of us. Quote Link to comment Share on other sites More sharing options...
southpole Posted April 1, 2017 Report Share Posted April 1, 2017 On 11/03/2017 at 0:37 AM, jaytee said: This is a five year old thread. You'll have to wait for them to come back in stock at @smashtv's shop like the rest of us. hi, may i ask why that is the only possibility? is there an agreement that only Tim may have the boards produced? sorry if this info is somehwere hidden here, my archeology skills are lacking these days :-) also if the gerbers are online somewhere i couldn't find them, but if they were, and it was allowed, someone else could have a couple boards made. cheers Quote Link to comment Share on other sites More sharing options...
jaytee Posted April 2, 2017 Report Share Posted April 2, 2017 You're free to make your own PCBs from the schematics but the Wilba design has not been released. But seriously, there's no reason to keep bumping the zombie thread. Quote Link to comment Share on other sites More sharing options...
OnOffArt Posted July 23, 2023 Report Share Posted July 23, 2023 Hi, Does anyone have the Wilba front panel schematics ? Djé Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.