julienvoirin Posted October 29, 2007 Report Posted October 29, 2007 what is this JB Weld ???I definitly need a box. i am waiting for your invoice.regards Quote
Wilba Posted October 29, 2007 Report Posted October 29, 2007 Crystal mounting pads? I didn't know there was such a thing.If anyone reads about this and thinks they really need "crystal mounting pads", you can use a tiny piece of card to hold the crystal off the PCB while you solder it, or if you really want to get fancy, make a "crystal mounting pad" out of cardboard. Quote
TheAncientOne Posted October 29, 2007 Author Report Posted October 29, 2007 Crystal mounting pads? I didn't know there was such a thing.Standard on certain types of board, to insulate via's and provide a little bit of stand-off. As you can see, they're not exactly expnsive - unlike the mounting stand-offs for LED, which can cost more than the LED.Crystal pads at RapidThere is a whole range of this type of hardware - the military nearly always had their transistors on pads. If you're using old fashioned TO5 cans these can stop a mechanical shock detaching the track on single sided boards. I used to fit them to some makes of light dimmer pack for on the road use, cut down on repair bills a lot. These are free to those that want them, (and I'm posting a box to), whilst I have stock. Anyone else needs to send me an SAE.On a similar note, I've realised that I can give 4 people a bag of sixteen of those mylar 22n caps. Same rules. Quote
julienvoirin Posted October 30, 2007 Report Posted October 30, 2007 those mylar 22n capshey i am interested, but i only need 12 caps, i already have the 4 others. Very nice from you.BTW i have used the Wilba cardboard technique and it works very well. Another hack is to use a very small piece of adhesive rubber on the diode print (which contains the metallic hole), then solder as usual. Quote
TheAncientOne Posted October 30, 2007 Author Report Posted October 30, 2007 I'll save 12 Caps for you, Julien. I'll put them in with your box - will invoice for the box later today. Quote
TheAncientOne Posted October 30, 2007 Author Report Posted October 30, 2007 Prof Packing department updateI got all the '1 box' invoices out today and some speedy people who paid fast got their boxes in the post today as well:Sent as of 4pm 30/10/07 UK timeGoblinzSparxJulienVoirinOpKodToFMultiple pack invoices not out yet:- different prices. Quote
opkod Posted October 30, 2007 Report Posted October 30, 2007 is it possible to have one more ? ??? Quote
TheAncientOne Posted October 30, 2007 Author Report Posted October 30, 2007 @OpKodYes - I've ended up with a couple of spares, due to something of mine not being a practical fit into one.Shall I invoice you?Your first one is on the way - and posting 2 together makes only a few cents difference to the price anyway. Quote
SexyBeast Posted November 1, 2007 Report Posted November 1, 2007 Hello!Have I missed something? You have already sent boxes to 'some speedy people who paid fast'. But I have not had an invoice yet?! ??? Quote
Twin-X Posted November 1, 2007 Report Posted November 1, 2007 Hello!Have I missed something? You have already sent boxes to 'some speedy people who paid fast'. But I have not had an invoice yet?! ???Multiple pack invoices not out yet:- different prices Quote
DavidBanner Posted November 1, 2007 Report Posted November 1, 2007 just to make sure - can I have a set of the crystal pads please.... Quote
Wild_Weasel Posted November 2, 2007 Report Posted November 2, 2007 Hi!Could you please resend the invoice. My harddisk died on me yesterday, so no chance to get to my e-mails.Thanks a lot.Michael Quote
TheAncientOne Posted November 2, 2007 Author Report Posted November 2, 2007 Hi!Could you please resend the invoice. My harddisk died on me yesterday, so no chance to get to my e-mails.That's a bummer, hope you didn't lose anything really vital.I've cancelled the old invoice and sent a new one.Best wishes Quote
opkod Posted November 3, 2007 Report Posted November 3, 2007 received my first PT10 this morning, cool. thanks ;) Quote
suital Posted November 6, 2007 Report Posted November 6, 2007 Got my case today. Thank you for the effort you take with this bulk order and thank you for the caps :) Quote
TheAncientOne Posted November 6, 2007 Author Report Posted November 6, 2007 6 tubes of J B Weld on the way:4 spoken for:MeTwin-XNatiGoblinz2 more up for grabs at about £6.Will have twin packing on Thursday, so last invoices will be out then. Quote
julienvoirin Posted November 6, 2007 Report Posted November 6, 2007 Profis JB Weld the same thing as Araldite ?best regards Quote
TheAncientOne Posted November 6, 2007 Author Report Posted November 6, 2007 No it's a metal loaded epoxy designed for glueing metals. It's what Wilba recommends for fixing the screw heads to the panel back.Hope this helps Quote
DavidBanner Posted November 8, 2007 Report Posted November 8, 2007 hi prof,I got my box today - thank you very much! Quote
LaRssA Posted November 8, 2007 Report Posted November 8, 2007 I received mine today. Thanks a lot! :)Lars Quote
julienvoirin Posted November 9, 2007 Report Posted November 9, 2007 oh oh !I received the box 2 days ago and I would like to thank Prof for the job ;)cheers Quote
sparx Posted November 9, 2007 Report Posted November 9, 2007 Mine hasn't got arrived yet :( but maybe soon.Thanks and regardsSparx Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.