Jump to content

Vote what Frontpanels for the MB6582 you would like


Twin-X

Recommended Posts

Well bring out your vote and also write below if you are in for a set of panels.

Confirmed so far from posts:

robwillis              4

kieran                 1

Narwhal                1

slorrin                 1

zid                     4

suital                  1

austingecko         1

SexyBeast           1

lief138                1

sparx                  1

idiotcountry2        1

unit-sound           1

analog-x              1

HK47                   1

stryd_one            1

Jack                    1

julienvoirin            1

Doug Wellington     1

Comandante64      1

modulator             2

stevenclements     1

lviklund                1

DrBunsen              1

Wild_Weasel         1

lukas412              1

nebula                 1 (+2 extra frontplanels)

audioguru42          1

dcer10                 1

brother303           1

jimp                    2

acidkomplex          1

nige                    1

huck                   2

TheProf               1

kynsi                   1

dirge                   2

LaRssA                2

DavidBanner         1

reboot                 2

B.jamin da Bass     1

cimo                    1

amp1ron               1

NorthernLightX      1

Twin-X              1

Total:                  56

Link to comment
Share on other sites

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

i voted for alternate, but i'm definitely in for two sets no matter what design is used.

honestly, i'd prefer the original one if the font were a little more clear (bold/bigger??), and the waveforms were graphical rather than text. both look amazing though. :)

Link to comment
Share on other sites

The pic of the alternate one isn't the latest...

http://members.optusnet.com.au/~wilba6581/mb-6582/MB-6582_frontpanel_alternate.pdf

I did a little tweaking the other night. I prefer the label "SID" instead of "CHANNEL" for selecting Left/Right SID (it is actually labelled "SID" in the menu on the LCD).

(Altitude: can you edit your post with the pictures?)

Link to comment
Share on other sites

The pic of the alternate one isn't the latest...

http://members.optusnet.com.au/~wilba6581/mb-6582/MB-6582_frontpanel_alternate.pdf

I did a little tweaking the other night. I prefer the label "SID" instead of "CHANNEL" for selecting Left/Right SID (it is actually labelled "SID" in the menu on the LCD).

(Altitude: can you edit your post with the pictures?)

I cant until I get home, there is something jacked with your PDF and it wont open in illustrator 10 correctly (line weights are super thick) and I have CS at home but 10 here at the office

Link to comment
Share on other sites

I like the graphic waveforms in the alternate, but prefer the simple lines of the original (i.e. where LED's are grouped, the "alternate" has the lines go thick and encompass the label, but the original just has a nice, clean line).  I wish we could have the original but with graphic waveform selection.

Link to comment
Share on other sites

Isn't TK using the term "SID Engine" to describe the SID firmware mode (bass line, multi, lead), yet we are using the word "SID Engine" on this front panel to distinguish between which core we're addressing?  I mean, I know I'm being nitpicky, but ...  :-\

Maybe we should use the word "core" or something instead?

Link to comment
Share on other sites

Isn't TK using the term "SID Engine" to describe the SID firmware mode (bass line, multi, lead), yet we are using the word "SID Engine" on this front panel to distinguish between which core we're addressing?  I mean, I know I'm being nitpicky, but ...  :-\

Maybe we should use the word "core" or something instead?

"SID Engine" is the term TK told me to use.

There are four "SID Engines" (running on four Cores) and each "SID Engine" can be in one of four modes.

In V1, there was only one Core per SID, so the labels "SID 1", "SID 2" etc. were fine.

In V2, each Core can control one or two SIDs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...