schokobaer Posted March 24, 2010 Posted March 24, 2010 Got it! many thanks to you... :thumbsup: :thumbsup:
RoyalScam Posted March 25, 2010 Posted March 25, 2010 Got my two boards today in Florida. Thanks nILS, beautiful work! Scam
Wilba Posted March 25, 2010 Posted March 25, 2010 Hi nILS, My boards didn't arrive today. You suck at the bulk order madness. :frantics: :frantics: :frantics:
m00dawg Posted March 25, 2010 Posted March 25, 2010 Board received yesterday and, I'll admit, the red does look good.
timyo Posted March 26, 2010 Posted March 26, 2010 nILS, Most sincere apologies, its has been nuts and for some reason all my midibox forum emails were caught my spam filters. I will make payment in the Ammount of €22.34 EUR on Friday March 26th. I don't login to this board as much as I should... Tim
Protosx Posted March 29, 2010 Posted March 29, 2010 Hi Nils, boards arrived!!!!! Thank you very much!!!!!! Protosx
m00dawg Posted March 29, 2010 Posted March 29, 2010 Anyone have recommendations on a case for the GM5x5x5? In doing measurements, it looks like it would fit in a half-length rackmount case? Are the dimensions of the board fairly common? My goal is to see if I can find a clear plastic box for it or have one made via Pokono but I may have to settle with something less flashy for the time being, and have thought about a rackmount case (as soon as I have some rack space :)
strophlex Posted March 29, 2010 Posted March 29, 2010 Anyone have recommendations on a case for the GM5x5x5? In doing measurements, it looks like it would fit in a half-length rackmount case? Are the dimensions of the board fairly common? My goal is to see if I can find a clear plastic box for it or have one made via Pokono but I may have to settle with something less flashy for the time being, and have thought about a rackmount case (as soon as I have some rack space :) I put mine in a 1U rack case to fit all the ten midi connectors. I can post pictures if interested.
m00dawg Posted March 31, 2010 Posted March 31, 2010 Yeah if you don't mind, or send me a PM if you prefer. Are you using a full-length 1U case? I was hoping on saving some space there and was going to mount my ports to the board (at least for this one) since I don't be touring with it or anything. I'm actually looking for a clear top case since I can see the LEDs that way without having to route them elsewhere :)
Altitude Posted April 2, 2010 Posted April 2, 2010 (edited) Yeah if you don't mind, or send me a PM if you prefer. Are you using a full-length 1U case? I was hoping on saving some space there and was going to mount my ports to the board (at least for this one) since I don't be touring with it or anything. I'm actually looking for a clear top case since I can see the LEDs that way without having to route them elsewhere :) You can do them at ponoko reasonably cheap. I did mine in bambo but clear acrylic would not be any more expensive Edited April 2, 2010 by Altitude
m00dawg Posted April 2, 2010 Posted April 2, 2010 Ooh that looks nice! Know of any software one can use that is reasonably cheap for making the Pokono templates and/or would you be willing to share your template design? :)
Altitude Posted April 3, 2010 Posted April 3, 2010 (edited) Ooh that looks nice! Know of any software one can use that is reasonably cheap for making the Pokono templates and/or would you be willing to share your template design? :) You can use Illustrator, Correldraw, Freehand, or Inkscape (which is free) My file is available here: http://midiot.net/gm555a.eps and the general templates are here: http://www.ponoko.com/make-and-sell/downloads#templates Edited April 3, 2010 by Altitude
ssp Posted April 7, 2010 Posted April 7, 2010 nils the only crystals i can get are in the hc49/s format, in your bom they are hc18/u format, will the 49's do?
madox Posted April 7, 2010 Posted April 7, 2010 Forgot to say my shipment arrived safely. Nicely packed, thanks.
nILS Posted April 8, 2010 Author Posted April 8, 2010 49/18 is the package. They have the same footprint, either one will do. The HC18 is a bit higher, and the 49 is the flat one.
strophlex Posted April 11, 2010 Posted April 11, 2010 Here are a few pics of my 1U case mount. I guess it is self explaining. The USB connector is a type A-type B converter. Really nice!
HUROLURA Posted May 7, 2010 Posted May 7, 2010 (edited) Hi Nils, Any plan about the spare board from bulk order 2. How many spares do you have ? No hurry but just to have an idea about how to plan my own projects :ahappy: Edited May 7, 2010 by HUROLURA
nILS Posted May 9, 2010 Author Posted May 9, 2010 There's roughly 30 spares but I won't be able to send any out this week since I am not at home. Just sign up and I'll send you a confirmation at some point next weekish.
taximan Posted May 9, 2010 Posted May 9, 2010 Hiya Nils, My name is on the list (spares) but I thought it wise to add it here also,just one board please. cheers Paul
HUROLURA Posted May 10, 2010 Posted May 10, 2010 Hi Nils, Already in the list for 2 boards, I would be happy to take 5 instead if you have enough for everybody else on the list. I would have edited the Wiki Page myself but I cannot figure out my I cannot login to do so ... Strange. So if still available I would like to get a total of 5 boards. Thanks and just take your time
kaleaf Posted May 22, 2010 Posted May 22, 2010 (edited) I put my name on the list Edited May 23, 2010 by kaleaf
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now