Goblinz Posted September 10, 2007 Report Share Posted September 10, 2007 i dont need the bankstick chips and i dont need the pics.. would that mean $75.. or are banksticks included in that price??Pricing:$100 with PIC chips, $75 without.The $75 is without the PICS. I also have PICS and bank-chips so would be interested if it would be possible to knock the price of the banksticks off, otherwise they will go to waste. I'm in two minds whether to order a kit with the PICS as I reckon that the cost of building the burner won't be so far off $25; I would then have to find a project for the spare PICS though. G Link to comment Share on other sites More sharing options...
brother303 Posted September 10, 2007 Report Share Posted September 10, 2007 Hi Smash,I`m in for a complete base pcb kit with pics.Thanks lot! ;DBrother303 Link to comment Share on other sites More sharing options...
jonesybj Posted September 10, 2007 Report Share Posted September 10, 2007 Count Me In For 1 Complete kit with PIC's Link to comment Share on other sites More sharing options...
Jaicen Posted September 10, 2007 Report Share Posted September 10, 2007 I definitely recommend building the burner on the uCapps site. Works just fine, and you'll find other uses for it too. That said, i'm getting my PIC's off smash as soon as I can ;) Link to comment Share on other sites More sharing options...
austingecko Posted September 10, 2007 Report Share Posted September 10, 2007 Count me in for 1 kit + PICS. Thank you! 8) Link to comment Share on other sites More sharing options...
janvanvolt Posted September 10, 2007 Report Share Posted September 10, 2007 Count me in for one Kit with PICS as well.. Link to comment Share on other sites More sharing options...
nebula Posted September 10, 2007 Report Share Posted September 10, 2007 I just went over the base PCB parts list, and not counting sockets and headers I estimate a cost of about $170 Cdn if I were to try to buy all these parts myself. (That's about $155 USD these days) ... I'd probably need to make about a hundred MB-6582's before I could do it any cheaper than $100, and that doesn't even take into account the time spent sourcing, dealing with back orders, etc.My only wish is that I could order this "kit" today.But since my time and sanity are valuable, I'd like to offer a firm "count me in" - and I will wait patiently. Link to comment Share on other sites More sharing options...
Wilba Posted September 10, 2007 Report Share Posted September 10, 2007 Count me in for 1 kit.... but I already have the PICs and banksticks... and a lot of transistors and resistors... and lots of 74HC165... so I only really need the IC sockets and the capacitors... no wait, I've got heaps of 100nF capacitors, but not the big electrolytics or the little ceramics you need for the crystal... oh definitely need the 10Mhz crystals although I have one already, so only need 3 crystals... so it's IC sockets, all the capacitors except 100nF, all the chips except PICs and 24LC512 and 74HC165... hang on, I got a spare optocoupler cos I bought about five when I built my last MB-6582... so don't need that one... and the regulators but I only need one 7809 cos I don't use 6581 at all.... oh and I've run out of resistor networks so I need those, but not any of the 10K or 1K ones, better throw in the 5k6 and 1k2 cos I don't know if I have them... hope that's not too much trouble Smash, cos I wouldn't want to have any parts left over or anything. Link to comment Share on other sites More sharing options...
Goblinz Posted September 10, 2007 Report Share Posted September 10, 2007 Count me in for 1 kit.... but I already have the PICs and banksticks... and a lot of transistors and resistors... and lots of 74HC165... so I only really need the IC sockets and the capacitors... no wait, I've got heaps of 100nF capacitors, but not the big electrolytics or the little ceramics you need for the crystal... oh definitely need the 10Mhz crystals although I have one already, so only need 3 crystals... so it's IC sockets, all the capacitors except 100nF, all the chips except PICs and 24LC512 and 74HC165... hang on, I got a spare optocoupler cos I bought about five when I built my last MB-6582... so don't need that one... and the regulators but I only need one 7809 cos I don't use 6581 at all.... oh and I've run out of resistor networks so I need those, but not any of the 10K or 1K ones, better throw in the 5k6 and 1k2 cos I don't know if I have them... hope that's not too much trouble Smash, cos I wouldn't want to have any parts left over or anything.Point taken , I'm sure somebody will want the spare bank-sticks :-[ Link to comment Share on other sites More sharing options...
Jason Milstead Posted September 10, 2007 Report Share Posted September 10, 2007 I'm in for a kit w/ PICS... keepin' it simple... ;D Link to comment Share on other sites More sharing options...
gavgomad Posted September 10, 2007 Report Share Posted September 10, 2007 Hi all.... Usually I don't do a "me too", but just in case this is a more official "speak up or lose out", I'm in for a full base kit with PICs.... No rush, of course - Canada Post is slow as death with my board and SIDs anyway, and I'm still deciding what the final feature set of my box will be.... ;)Gavin Link to comment Share on other sites More sharing options...
nige Posted September 10, 2007 Report Share Posted September 10, 2007 I suppose I'd better add a "me too count me in" post.For a kit and PICS, me too! Count me in! Link to comment Share on other sites More sharing options...
huck Posted September 10, 2007 Report Share Posted September 10, 2007 will be in for 2 kits. thanks Link to comment Share on other sites More sharing options...
modulator Posted September 11, 2007 Report Share Posted September 11, 2007 hiis there an estimated deadline? Link to comment Share on other sites More sharing options...
nullptr Posted September 11, 2007 Report Share Posted September 11, 2007 Count me in for a kit w/o PICs!-- Wil Link to comment Share on other sites More sharing options...
ToFiC Posted September 11, 2007 Report Share Posted September 11, 2007 You can count me in :) (with pic) Link to comment Share on other sites More sharing options...
kk74 Posted September 11, 2007 Report Share Posted September 11, 2007 I'm in for a kit. Link to comment Share on other sites More sharing options...
stryd_one Posted September 11, 2007 Report Share Posted September 11, 2007 I'll take 3. But you must respond to my emails immediately or no sale ;D Link to comment Share on other sites More sharing options...
Twin-X Posted September 11, 2007 Report Share Posted September 11, 2007 Point taken , I'm sure somebody will want the spare bank-sticks :-[I only need banksticks so i could buy them from you. Link to comment Share on other sites More sharing options...
mono-poly Posted September 11, 2007 Report Share Posted September 11, 2007 I am in for a kit as well :) Link to comment Share on other sites More sharing options...
stevenclements Posted September 11, 2007 Report Share Posted September 11, 2007 I'm in for a baseboard kit and the control surface kit when you have time... as for professing my love... hmmm I'd like to see what you look like first ;D yeah I'm shallow.:)Steveall kidding aside - [glow=red,2,300]thanks SmashTV![/glow] Link to comment Share on other sites More sharing options...
DrBunsen Posted September 11, 2007 Report Share Posted September 11, 2007 I'm down for one - I'll have a think about whether I want the programmed PICs though Link to comment Share on other sites More sharing options...
analog4ever Posted September 11, 2007 Report Share Posted September 11, 2007 Count me in for one baseboard kit with PICs.Thanks!John Link to comment Share on other sites More sharing options...
amp1ron Posted September 12, 2007 Report Share Posted September 12, 2007 Yes baseboard parts kits are in process, but I have to wait until I'm caught up with current orders before I can finish them......SmashTV,I see a lot of people saying they want a parts kit (including me who wants 2). I can imagine you might have a very large investment in parts that you have to order before people pay for them.If it helps, I'll be glad to pay for parts kits before you have to place the parts orders. If many people were willing to do that as well, then all of us could save through your bulk-purchasing, and you could still not worry about people backing out of paying/ordering. I'm sure there would be many others willing to pre-pay as well, just like we've done for the MB-6582 PCBs and front/back panels. Link to comment Share on other sites More sharing options...
Wilba Posted September 12, 2007 Report Share Posted September 12, 2007 As far as I know, SmashTV has already bought what is required or had it in his stock already. Pre-paying isn't required. Link to comment Share on other sites More sharing options...
Recommended Posts