-
Posts
1,184 -
Joined
-
Last visited
-
Days Won
30
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by Altitude
-
-
-
-
Groupbuy USA 40x2 Oleds and duoled tact switchs
Altitude replied to Macotronic's topic in Bulk Orders
oop. put me down for a 20x4 green, not red -
Groupbuy USA 40x2 Oleds and duoled tact switchs
Altitude replied to Macotronic's topic in Bulk Orders
Put me down for 2 green 40s and one 20x4. See if they ship dhl, it will be half of fedex -
Groupbuy USA 40x2 Oleds and duoled tact switchs
Altitude replied to Macotronic's topic in Bulk Orders
I'll be able to answer that this weekend, I have a white OLED 128x64 that's just waiting for a PCB which should arrive tomorrow. -
Comparison: Bit over exposed on purpose to show the brightness difference. Keep in mind that I have smoke colored windows in mine, the Optrex parts looked OK with the window but were on the dark side as a result, green OLED fixed that issue and then some.. Dont forget to change the LCD type to 0x02 in the bootloader, both displays wont work at the same time otherwise and to set the jumper to 3.3v and the "out of focus but you get the drift" done pic
-
[SOLVED] Can't make two OLED LCD's working together
Altitude replied to cube48's topic in Testing/Troubleshooting
Yay! -
[SOLVED] Can't make two OLED LCD's working together
Altitude replied to cube48's topic in Testing/Troubleshooting
Sorry if this obvious and I am just dense: " The new CLCD_PP type has to be configured in the bootloader with "set lcd_type CLCD_PP". " I assume this is done in the MIOS studio terminal? (on the STM32F4 core) Got some green ones :) -
Groupbuy USA 40x2 Oleds and duoled tact switchs
Altitude replied to Macotronic's topic in Bulk Orders
first-components has green and white. -
Mine arrived yesterday and they are awesome. I was a bit concerned that the PCB is taller than a LCD one but it works fine even in my case where everything is tight. The fact that the display is a third as thick gives me much more breathing room depth wise and that is very welcome since I was really pushing it in my setup. One thing to consider with these is mounting since they are so thin, I have 1/4" blind thread studs on my case and they almost reach the holes of the display so I have to come up with some magic to deal with that since I cant use a standoff like I did for the standard displays..
-
Dhl. Its was 30 euro. I believe that option they give is to use you own forwarder account
-
Went with the Italians and my greens are in the mail. Will report back when they arrive
-
I have a friend in italy that could relay anything we need if it's a proble. The winstar stuff is a good find but the Italian place also carries Wisechip stuff which is of interest to me as well (128x64 G OLEDS). See what you can do on your end, Taiwan is a LOT close to Australia than it is to Detroit
-
nice, will have to look into this. White also
-
AFAIK, he was in the process of getting more made.
-
you could try him on IRC. At the end of the day, the MB6582 is a much easier build since you dont have to deal with all the DIN/DOUT stuff for the controls.
-
Unfortunately, No. (used to have one) Those dont support the PIC you need for the MB6582 You want a PICit3 (or clone http://www.amazon.com/Development-PICkit3--Circuit-debugger-programmer-Windows/dp/B01ALP3XTS/ref=sr_1_5?s=pc&ie=UTF8&qid=1456348172&sr=1-5&keywords=PIC+programmer) The real deal is $50
-
just do it yourself
-
holy vegas mode batman
-
http://midiboxshop.bigcartel.com/product/core-stm32f4-board http://midiboxshop.bigcartel.com/product/midi-i-o-module-board
-
Heh, no. Sign me up. Been assembling parts for this since you announced it Been living in the states too long, "oh hell no" is a positive reaction to something If you do proceed with releasing/group buy/sharing files etc. might I recommend using dual/tri footprints for the tacts like Smash's sequencer boards to future proof it
-
oh hell no. Not pulling any punches are we?
-
export it as SVG, open in Illustrator, save as EPS