Shuriken

It's about two things. Willing todo it and having a supplier. A year ago i tried to get something going for the MB6582 Window. But my supplier bailed on me. Which i cannot totally blame him for, it is as julian says, a lot of work which wont really make you much money.

I was speaking in general ofcourse and not specifically about the VCO. Do you manage to get 7 octaves then with only 2,8V?

gtxdude: 1 Arkay: 1 NorthernLightX: 2 Shuriken: 1 kristal=: 1 ytsestef: 1 ---------------------- Total: 8

Not sure if it is related to your problem. But Yusynth modules expect normal CV outputs between -5 and +5V. However the AOUT_NG (build to spec) will only output between -2,8 and 2,8V. See this

Here we go again:

If? My Sids say 8580 R5 :wink:

I am afraid i can't help you with that. Need to fix my AOUT and VCF as well :wink:

He actually mentions this in the post you linked: So basically you would have to change both the AOUT and the VCF.

I am pretty sure that Seppoman mentioned his SSM2044 VCF design matches the 2,8V. So basically you cannot mix his designs and common modular VCF designs. Well you can but you will have less resolution ofc.

Nice, me envious :homestar:

Yeah, that should do the trick. on a similar problem

Doesn't the STM32 Core use a 12Mhz crystal? Maybe you could have a search for that on the forum.

Klopt, het is ook zo goedkoop omdat het in een dikke kartonen envelope verstuurd wordt. Maar als je een kit wilt, heb je weinig keuze.

Ik raad je aan om het via de Low Value Pagina te bestellen: http://www.avishowtech.com/buy_lvo.html Op die manier hoef je geen douane kosten te betalen. Daarnaast zijn de verzendkosten maar een dollar of 6. Als je samen een groot pakket met spullen besteld, heb je die voordelen niet. Dan zijn de verzendkosten opeens bijna 40 dollar.

Several people have tested this with MB SID and noise is not an issue. The difference with the reichelt one is besides the outpower power, efficiency is 70 vs 77 on the Mean Well.

I think so. Lots of DIY builders use them. But i cannot be sure, till i get mine :wink:

Ok, sign me up for 3 PSU with molex.

I assume the smaller panels are top and bottom panels? so no back panel.

Question about the molex connector. Will this just be the male connector, or will it include an empty female as well?

If you can solder something, why not solder a new speed dail on your novation? :wink:

I made a 1U frontpanel and back panel design in FPD a while back. However i made it as cheap as possible (I figured i could do an inlay myself). If possible i want to see if i can get 2 GM5x5x5 shoved in there. Which might be possible if you mount one upside down. I will have to see, if it will actually fit if i receive my case from modushop (NorthernLightx and me bought some cases together) So i don't have a propper layedout backpanel design yet. There is enough room on the front for 1 midi in/out. The mounting holes are specific for this case. Personally i am not a fan of the USB on the front. But i can imagine that for you laptop users, it might be convenient.

That would be my suggestion. The NAND gates in the GM Voice do the TTL to Midi conversion. However Martijn is looking for a TTL Level Gate something like this to get from 3,3V to 5V TTL.

Looks like you are right. I only checked my Korg en Terratec board, but with the NEC it seems to be used. I would do TTL. However i am not sure if that will work with the LPC17 as it's 3,3V. The boards expect 5V TTL. So port J4B and then connect SD & SC and VS. You should connect VS to digital ground.

TTL Midi Out won't be necessary. I have to come across the first board that supports Midi Out.