TK. Posted October 30, 2011 Report Share Posted October 30, 2011 I'm starting a bulk order for frontpanel PCBs of the MIDIbox SEQ V4 Lite project: http://www.ucapps.de/midibox_seq_lite.html Please add your name and desired quantity to the list if you are interested: http://www.midibox.org/dokuwiki/doku.php?id=tk_mbseqv4l_pcb_bulk_order The estimated price is ca. 10..20 EUR, depending on the quantity. I will order the PCBs end of november, so that you should receive them before christmas! :smile: Update: Again some good news: Due to the high demand I decided to hand over the bulk order to Tim aka. SmashTV! This has some advantages: I give it into the hands of a professional (he already improved the Gerber Files! :) ) you can order the MBHP_CORE_LPC17 and MBSEQV4L FrontPanel PCB from a single source you will be able to order the PCBs from the Low Value Order Page Shipping costs to Europe (e.g. Germany): ca. 5 EUR PCBs will be available by end of november Long-Term availability of both PCBs! All people who have already added their name to the bulk order list will be informed via PM once the PCBs are available. Therefore it still makes sense to enter your name if you are interested. Best Regards, Thorsten. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
mastomo Posted October 30, 2011 Report Share Posted October 30, 2011 absolutly great !!!! it looks as if I am a lucky guy :clover: Quote Link to comment Share on other sites More sharing options...
ilmenator Posted October 30, 2011 Report Share Posted October 30, 2011 Thorsten, could you give a few more deatils about size of the PCB and button spacing? It seems the PCB could be useful for other applications as well, or is the button / LED matrix something very specific / exotic? Quote Link to comment Share on other sites More sharing options...
TK. Posted October 30, 2011 Author Report Share Posted October 30, 2011 I do agree that the PCB could also be used for other projects, especially since an isolated driver is available (blm_cheapo). Link to usage example The size is 25x10 cm, it fits over the MBHP_CORE_LPC17 module if two 18mm spacers (-> 36mm) are used. Advantage of this size: there is no need to cut the LPC-Link interface Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
tw3 Posted October 30, 2011 Report Share Posted October 30, 2011 hello all I think this will be my first midibox build. name added to the list Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted October 30, 2011 Report Share Posted October 30, 2011 I am looking forward to one of these for christmas :smile: Quote Link to comment Share on other sites More sharing options...
slo Posted October 31, 2011 Report Share Posted October 31, 2011 Hello This will be my first MidiBox build too, i'm so glad I came across this. I would like 2 please. George Quote Link to comment Share on other sites More sharing options...
dtg84 Posted October 31, 2011 Report Share Posted October 31, 2011 (edited) Please add my name to the list for +1! Thanks, Thorsten!! Edited October 31, 2011 by dtg84 Quote Link to comment Share on other sites More sharing options...
ErMangaver Posted October 31, 2011 Report Share Posted October 31, 2011 Great! I'm in for one. Quote Link to comment Share on other sites More sharing options...
ilmenator Posted October 31, 2011 Report Share Posted October 31, 2011 This will be my first MidiBox build too, i'm so glad I came across this. I would like 2 please. Please add my name to the list for +1! Thanks, Thorsten!! You will have to add your names to the list yourselves, otherwise it's not going to happen... Find the link in the first message in this thread. Quote Link to comment Share on other sites More sharing options...
monokinetic Posted October 31, 2011 Report Share Posted October 31, 2011 Hi TK, This looks great, but before I sign up for a PCB I'm interested in the case that has been mentioned. Will this PCB sit behind an acrylic front panel, or will the buttons and LEDs be exposed? David Quote Link to comment Share on other sites More sharing options...
taximan Posted October 31, 2011 Report Share Posted October 31, 2011 Thanks for another great project TK. cheers Paul Quote Link to comment Share on other sites More sharing options...
ilmenator Posted October 31, 2011 Report Share Posted October 31, 2011 This looks great, but before I sign up for a PCB I'm interested in the case that has been mentioned. Will this PCB sit behind an acrylic front panel, or will the buttons and LEDs be exposed? Well at least the buttons will have to be exposed to be any useful, don't you think? :whistle: Quote Link to comment Share on other sites More sharing options...
monokinetic Posted October 31, 2011 Report Share Posted October 31, 2011 Well at least the buttons will have to be exposed to be any useful, don't you think? :whistle: Aha OK maybe I wasn't clear enough, I want to know if there will be a drilled front panel covering the PCB as part of the box or not (similar to Wilba's front panel for the MBSeq full version). The reason I'm asking is that you can see on the photo that there are the 8 BC337 transistors in the right hand top corner of the PCB. These look almost as high as the buttons and I'm not sure how this will be handled. Hope that's clearer... David Quote Link to comment Share on other sites More sharing options...
TK. Posted October 31, 2011 Author Report Share Posted October 31, 2011 These look almost as high as the buttons and I'm not sure how this will be handled. The height of the (soldered) transistors is 6mm (almost the same as for the LEDs), whereas the height of the buttons is 9.5mm This means, that the 2mm acryl panel will sit on the top of transistors, LEDs will be under the (transparent) panel. Christian will continue to work on this once he's back from vacation. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
monokinetic Posted October 31, 2011 Report Share Posted October 31, 2011 The height of the (soldered) transistors is 6mm (almost the same as for the LEDs), whereas the height of the buttons is 9.5mm This means, that the 2mm acryl panel will sit on the top of transistors, LEDs will be under the (transparent) panel. Christian will continue to work on this once he's back from vacation. Best Regards, Thorsten. OK thanks for the clarification TK, sounds like you've thought of everything :) I'll go and sign up then! Cheers David Quote Link to comment Share on other sites More sharing options...
slo Posted November 1, 2011 Report Share Posted November 1, 2011 You will have to add your names to the list yourselves, otherwise it's not going to happen... Find the link in the first message in this thread Hey thanks for the headsup....done. George Quote Link to comment Share on other sites More sharing options...
analog monster Posted November 1, 2011 Report Share Posted November 1, 2011 Before I add myself to the list could you confirm if: a) eagle file will be provided eventually b) how many layers the PCB will be I have recently bought myself a CNC milling machine so I would be able to etch it myself if its 2 layers or less, and it is far more exciting to know I have made everything in a project Quote Link to comment Share on other sites More sharing options...
TK. Posted November 1, 2011 Author Report Share Posted November 1, 2011 a) eagle file will be provided eventually b) how many layers the PCB will be yes, Kicad files will be provided once we've finalized the layout, and it has two layers. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
toadstool Posted November 1, 2011 Report Share Posted November 1, 2011 Superb! My name is down for one thanks TK. Quote Link to comment Share on other sites More sharing options...
HUROLURA Posted November 7, 2011 Report Share Posted November 7, 2011 Added my name for the 75th board !!! Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted November 7, 2011 Report Share Posted November 7, 2011 Ha! Waited for that to happen... ´76 is my year of birth - need exactly this one :) Quote Link to comment Share on other sites More sharing options...
nebula Posted November 8, 2011 Report Share Posted November 8, 2011 (edited) UHM! AHEM!! COUGH COUGH COUGH -nerd- COUGH! /me thinks he'll delete his name and add it to the end, giving Hawkeye board number 75 just for being such a dork. Edited November 8, 2011 by nebula Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted November 8, 2011 Report Share Posted November 8, 2011 (edited) Heheh Nebulers :) 75 is tha even moar lucky numba, birthyear of mah gurl :) Edit: somehow the quantites are messed up - i fear neither hurolora gets #75 nor i get #76, but we will get #76 and #77, but that number looks lucky, too :) I updated to the correct count of 79, nao :) Edited November 8, 2011 by Hawkeye Quote Link to comment Share on other sites More sharing options...
hyperTOOTH Posted November 10, 2011 Report Share Posted November 10, 2011 first timer here too! This sequencer is just too damn cool to ignore. I edited the wiki page, is that alls i gotta do? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.