Jump to content

gslug

Members
 View Profile  See their activity

  • Posts

    219

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by gslug

  1. gslug
    I can't work out the switch! It seems to have a pin missing as I would expect two pins for the switch itself and another two for the LED. Looking at the picture, the two pins at the bottom appear to be the LED and the one at the top is one of the switch contacts - the other is missing!:frantics:
  2. gslug
    PSU Module + illuminated switch and power cable entry
    That is tiny! For your Seq?
  3. gslug
    I got mine on Ebay. I can't remember the seller now, but red LCDs do exist!
  4. gslug

    haz Jupiter, but no time to play with it. Off to work in a bit.

    1. Show previous comments  6 more
    2. gslug

      gslug

      ...and today's rather cheaper purchase - moar 8580s. I now have a fully loaded MB6582 at last.

    3. jojjelito

      jojjelito

      Congrats again!

    4. gslug

      gslug

      Thanks again!

  5. gslug

    Formulor sheet is ready

    gslug commented on Zossen's blog entry in Zossen's Blog

    Very nice - and very efficient use of the sheet! What happened to picture 2?
  6. gslug

    has GAS again...

    1. Show previous comments  3 more
    2. gslug

      gslug

      Too much GAS - I was going for a Sequential Six Track and then a JP-6 started calling me....

    3. jojjelito

      jojjelito

      Jupiter 6 is a very *very* nice synth! Get the Europa kit if you can :D

    4. gslug

      gslug

      I intend to fit Europa at some point, but first I have other projects to finish....

  7. gslug

    has almost finished a flanger, only to run out of jacks and switches. Arrgh.

    1. Show previous comments  2 more
    2. Hawkeye

      Hawkeye

      same problem for me, but then i strategically invested in chewing gum and watched a few macgyver howtos... :)

    3. gslug

      gslug

      Haha! I miss Macgyver. Might have to invest in some DVDs...

    4. jojjelito

      jojjelito

      I'm saving my Macgyver moments until it's life or death. On the other hand, I now have this huge stash...

  8. gslug

    IBM RackX2

    gslug commented on technobreath's gallery image in Members Gallery

    IBM RackX2
    Just emptied my rack, which formerly contained two servers, switch, UPS, etc. I have an urge to start filling it with Roland MKS series modules.
  9. gslug

    has just built a Boss CE-2 clone. Needs moar effects!

    1. Show previous comments  1 more
    2. Hawkeye

      Hawkeye

      also investigate Jomox T-Resonator time-space-matrix warper :)

    3. Brathering

      Brathering

      I can hardly advise a bitcrusher.

      Don't find a good diy solution yet, but have lend an OTO Biscuit from a friend recently and if they aren't counted ~500€ I've buy one instantly!

      The "Hexe Bitcrusher" looks good as well, but don't test so far.

      Maybe a good "diy-group-project" for the future(!?)

    4. gslug

      gslug

      Thanks! The Mutron Bi-Phase looks cool.....

      and the T-Resonator looks scary! As for a bitcrusher - I wonder if I could use a Shtruthi-1 with digital filter board.

  10. gslug

    MB909 PCB preview

    gslug commented on pcbatterij's gallery image in Members Gallery

    MB909 PCB preview
    Very nice. I want need one of these.....:drool:
  11. gslug

    provisory case

    gslug commented on Brathering's gallery image in Members Gallery

    provisory case
    I like it! Looks a lot more solid than my cardboard version.
  12. gslug

    9090 1

    gslug commented on Antix's gallery image in Members Gallery

    9090 1
    Not a proper Midibox! Ah, but will it mutate into an MB-9090?
  13. gslug

    MB909?

    gslug replied to moogah's topic in Design Concepts

    Against ground I get: +2.04V, 0V, +5V and +3.1V. As I can't recall which is pin 1, that is from left to right, looking from the front (pot side) of the board. Hope this helps! Kevin
  14. gslug
    PM sent.
  15. gslug
    Happy Birthday Wilba!:queen:
  16. gslug
    It felt like the wiring took me longer than anything else! I hate crimping.
  17. gslug

    is ordering parts: Quad IIc, AoutNG, core 32 and MN3007/MN3101 ICs.

    1. jojjelito

      jojjelito

      Hmm, it sounds like someone will build some serious hardware :)

    2. gslug

      gslug

      Not really - it is for three seperate builds.

    3. jojjelito

      jojjelito

      Good! Then you have projects in the pipe and all is well :)

  18. gslug

    haz Shruthi

    1. Show previous comments  22 more
    2. gslug

      gslug

      Doesn't the real Polivoks make a Memorymoog look reliable?

    3. Hawkeye

      Hawkeye

      true, but it can be fixed with chewgum paper :-)

    4. gslug

      gslug

      I prefer duct tape.

  19. gslug

    is building effects units whilst waiting for Shruthi parts to arrive.

    1. Show previous comments  1 more
    2. gslug

      gslug

      Thinking about doing a flanger next. I have just finished a Gristleizer and a PT2339-based delay.

    3. Schrabikus

      Schrabikus

      @Jojjelito - they are quite cheap

      $4 for MN3007+3101 @ebay $10 for V3205+MN3102 @utsouce.net

    4. jojjelito

      jojjelito

      Oh! Thanks! Gonna do a Mutron bi-Phase clone at least! Have to browse what's out there... :)

  20. gslug
    Cool front panel. I don't know why, but it makes me think of 60s comic books!
  21. gslug
    Great news Jef. I'm looking forward to seeing the first pics of a completed, cased MB-9090. And I agree about the size - there are a lot of boards to accomodate, plus the transformer, etc. Kevin
  22. gslug
    The liquid was flux. You can get flux pens for easy application. Also get some fine solder - about 0.5mm diameter, and make sure that the tip of your iron is clean. I did my first surface mount board last week and it was much easier than expected. I ended up bridging a few pins, but solder wick fixed that. Give it a go - it isn't as scary as you think! Kevin
  23. gslug

    has just built a MIDIpal. First ever SMT soldering and I didn't make too much of a mess of it....

    1. Show previous comments  4 more
    2. Schrabikus

      Schrabikus

      Good practice is desoldering/soldering chips from old soundcards for example, or any other broken hardware.

    3. Gilesjuk

      Gilesjuk

      OPL board has a little SMT.

    4. gslug

      gslug

      Schrabikus - Hadn't thought about that. I have a box of old PCI cards.

      Gilesjuk - I'm on the list for the next (last?) batch of sammichFMs, so OPL will happen at some point.

  24. gslug
    Me too! I've added mysef to the spreadsheet. Thanks Jef! Kevin
  25. gslug
    Thanks for the Link TK, I'll have a go tomorrow.
×
×
  • Create New...