Polykobol Posted October 14, 2011 Report Share Posted October 14, 2011 I have a nice collection of all seppoman's PCBs that I never seem to find time to build and use. I even feel a bit guilty that he also helped me out with a lot of the trimpots, styro caps and miniature relays for the SSM2044 board as well. Soon I'm going to ruthlessly sell off stuff I'm not likely to use... so someone please remind me if it gets to 2012 and I haven't done a big virtual garage sale of electronic bits :wink: Hi, I am interested... Quote Link to comment Share on other sites More sharing options...
m00dawg Posted October 14, 2011 Report Share Posted October 14, 2011 Sort of a shame these boards aren't part of a standard layout from ucapps. I wonder how complex a board like that would be to make and offer openly to the community... Quote Link to comment Share on other sites More sharing options...
flip Posted December 9, 2011 Report Share Posted December 9, 2011 Anyone here who has a spare ETH and SD card PCB for me? Would be very nice :) Quote Link to comment Share on other sites More sharing options...
sneakthief Posted January 17, 2012 Report Share Posted January 17, 2012 Looking for a couple of SSM2164 boards... anybody? Wilba, isn't it time you clear out your junk? hehe Quote Link to comment Share on other sites More sharing options...
bugfight Posted January 17, 2012 Report Share Posted January 17, 2012 muahahhahaha wilba thought the world would end so offered up his toys... hmmm taunting the mighty queue in this fashion might end the world after all... Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted January 18, 2012 Report Share Posted January 18, 2012 spare ETH and SD card PCB flip, If no one answer, I advise you to look at eBay, there are cheap ready-to-go products, search for "arduino ethernet" & "arduino SD Card" :thumbsup: Quote Link to comment Share on other sites More sharing options...
flip Posted January 18, 2012 Report Share Posted January 18, 2012 flip, If no one answer, I advise you to look at eBay, there are cheap ready-to-go products, search for "arduino ethernet" & "arduino SD Card" :thumbsup: Ohh, I can use something like this with MBSEQv4? http://www.ebay.de/itm/ENC28J60-Ethernet-LAN-Module-for-Arduino-AVR-LPC-STM32-/280706213546?pt=LH_DefaultDomain_0&hash=item415b64e6aa http://www.ebay.de/itm/New-SD-Card-Module-Slot-Socket-Reader-for-Arduino-ARM-MCU-/280758300478?pt=LH_DefaultDomain_0&hash=item415e7faf3e Quote Link to comment Share on other sites More sharing options...
ilmenator Posted January 18, 2012 Report Share Posted January 18, 2012 http://www.ebay.de/itm/New-SD-Card-Module-Slot-Socket-Reader-for-Arduino-ARM-MCU-/280758300478?pt=LH_DefaultDomain_0&hash=item415e7faf3e Same but cheaper: ebay item number 290621132853 - I just ordered one, hopefully there is documentation for the pinout of the header... Quote Link to comment Share on other sites More sharing options...
flip Posted January 18, 2012 Report Share Posted January 18, 2012 (edited) Same but cheaper: ebay item number 290621132853 - I just ordered one, hopefully there is documentation for the pinout of the header... I actually would like a PCB with more holes, so it can be attached more nicely, like this: http://www.ebay.de/itm/JP-Serial-SD-MMC-Card-Data-Logger-Module-for-Basic-Stamp-Picaxe-Arduino-/170762907229?pt=LH_DefaultDomain_0&hash=item27c2432e5d But more than 10 times the price, and still oversea shipping? No thanks... Edit: This looks nice: http://www.ebay.de/itm/SD-TF-Card-Module-Reader-and-Writer-for-Arduino-ARM-MCU-/170711416047?pt=LH_DefaultDomain_0&hash=item27bf317cef Edited January 18, 2012 by flip Quote Link to comment Share on other sites More sharing options...
technobreath Posted April 14, 2012 Report Share Posted April 14, 2012 (edited) Wilba :) Time to let go of a couple of 2044 boards yet? :) hehe. Unless seppoman still has a couple of spares? :sorcerer: EDIT: Nevermind :) I did my own pcb, getting some protos made soon. Edited April 25, 2012 by technobreath Quote Link to comment Share on other sites More sharing options...
wicked1 Posted April 25, 2012 Report Share Posted April 25, 2012 Wilba :) Time to let go of a couple of 2044 boards yet? :) hehe. Unless seppoman still has a couple of spares? :sorcerer: EDIT: Nevermind :) I did my own pcb, getting some protos made soon. I'm interested in some of these SSM pcb's! Filter and VCA, but mostly the filters. Are the original PCB designs available for printing? If not, they should be :) Otherwise, I'd like some more info from Technobreath. Quote Link to comment Share on other sites More sharing options...
technobreath Posted May 18, 2012 Report Share Posted May 18, 2012 Hello. I have the design ready, and more people have asked about this. However, I can't do anything yet, unless I get the ok from seppoman. After all its his hard work I have based my design on, and since I'm not a rude Chinese pirate, I like to show seppo the honor of asking his permission. I have asked him, but I haven't got the answer yet. I know he knows I have asked him, but he is extremely busy atm with non midibox stuff, and I expect him to answer, but when he got time ;-) I will of course let u know how it works out. Quote Link to comment Share on other sites More sharing options...
ytsestef Posted July 29, 2012 Report Share Posted July 29, 2012 I'm looking for an SSM2044 PCB as well... Quote Link to comment Share on other sites More sharing options...
technobreath Posted September 5, 2012 Report Share Posted September 5, 2012 yo, i have forgotten about this thread, but I promised an update after talking to seppoman. Design has been tested in private closed trials, and works great. But there is not gonna be a public release of the files, simple reason is that there is too many people outside this forum copying and reselling that stuff, and either me or anyone else want that to happen. However, there is a chance that a new design - a slightly different approach - based around 2 ssm2044 that will become available for u guys to buy, but timeframe is not set yet. anyway, that's the status from my side on my reproduction of seppos exelent and hard work :). Quote Link to comment Share on other sites More sharing options...
Phatline Posted April 26, 2018 Report Share Posted April 26, 2018 (edited) and now? whats about VCA shematics or any little bit of doku? i want to know what P1-P4 are doing? is this some CV-Bipolar-Offset, or CV-Gain, or Audio Gain... where to measure and which Value to set? what happens if i have some failure while building, or put some beer over it, how can i debug without sheme? Board files i understand, but shemes? what i found out: Quote also reverse engeniering/understanding/troubleshooting/moding is nearly impossible when the pcbs are stuffed, because most of the traces are on the component site… or hidden behind the black paint\ — first i want to know for what are those POTs? Input Gain of Audio? or of CV? or some BIAS? POT P1 middle & right Pin connected to VCC- POT P1 left Pin connected to a 27K Resistor and this resistor to a nother 27K Resistor which is connected to CV1+ Input. the middle point of this2xresistors is going to the TL74-OP-Amp Pin1 which is a inverting input… The Output of this TL74 Stage is Pin1: its connected to Pin 6 SSM2164, which is the CV-Input When i measure Pin6 to Ground, and Turn P1 most left:1,8V… Turn P1 most right: 2,47V .... (wiki) Edited April 26, 2018 by Phatline Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.