jbdiver Posted October 4, 2015 Report Posted October 4, 2015 Boards arrived in the USA today. Smartly designed packaging! Now I just need to place the mouser order...
latigid on Posted October 4, 2015 Author Report Posted October 4, 2015 Great! It took a whole Sunday afternoon with a huge ultra-thick cardboard box I found, a borrowed jigsaw with a soft material blade and about 5 rolls of tape. I was very thankful for the jigsaw!One worry I had was the post might use it as a frisbee, but from what I'm hearing no problems so far. I didn't write "FRAGILE" because that apparently increases the chance of damage!Now you have to choose the LED colours
latigid on Posted October 5, 2015 Author Report Posted October 5, 2015 Cases have now entered production with an estimated ship date of October 14.In regard to Mouser orders, you may wish to wait for a clearer picture on sliders. The 10mm shaft is probably preferable, but we need to check the optimal resistance value as this product range is limited to 1k and 50k from Mouser. The 20k has a centre detent (apparently not too difficult to remove) but might sill be a bit too high.
latigid on Posted October 16, 2015 Author Report Posted October 16, 2015 Cases have shipped, please let me know if there are any problems (e.g. defects etc.) as soon as possible.
jbdiver Posted October 20, 2015 Report Posted October 20, 2015 (edited) The case arrived in the US this morning. Absolutely brilliant. I was a little worried about the slope of the case and overall height, but this case looks perfect. Edited October 20, 2015 by jbdiver 1
Altitude Posted October 20, 2015 Report Posted October 20, 2015 (edited) sweet. Looks like laser cut wood sides time (make it sound better)Is there a drawing of the case? I need the side profile only Edited October 20, 2015 by Altitude
sbm Posted October 21, 2015 Report Posted October 21, 2015 Very nice case, just got mine, plus the Mouser order and acrylic surface, this will be a good project to pass the winter months. :-)
Rowan Posted October 21, 2015 Report Posted October 21, 2015 My case arrived today and buttons have been ordered. The spacer and Mouser BOM will be ordered in the next few days.
TK. Posted October 21, 2015 Report Posted October 21, 2015 Got the case as well - really nice and especially robust one, I like it! :)
Phatline Posted October 21, 2015 Report Posted October 21, 2015 got mine!light and beauty!...in my dreams a few weeks ago i saw a some mushrooms in the wood, suddenly i saw a 16x32 blm on a dirty wodden desk, the set arround was a dessert party place, but the blm was still playing... in this moment i saw a woman and i decided to follow her... thx 1
MaG2k Posted October 22, 2015 Report Posted October 22, 2015 (edited) i got the case to...yesterday in the morning. looking realy great and robust. well done!thx latigit onso i only have to order at mouser and at Formulor. T.K. can you tell me which PIC18F4620 i specialy need for the mini-Core...at mouser i can by the PIC18F4620 I/P and a PIC18F4620 E/P?I think and i hope that i can burn the bootloader for my self with my "Sprut"-PIC-Burner. Regards MaG2k Edited October 22, 2015 by MaG2k
latigid on Posted October 22, 2015 Author Report Posted October 22, 2015 Glad you're enjoying the cases! I was equally impressed with the quality and maybe it's a road to go down for later MIDIbox enclosures. They had to do a few minor modifications during production, so I'll just get an update and provide the side dimensions for chunky wooden add-ons :).
latigid on Posted October 22, 2015 Author Report Posted October 22, 2015 Okay, please check the build guide thread for drawings and graphics files of the side.
malcor Posted October 23, 2015 Report Posted October 23, 2015 Case received and beautifully done. This looks and feels military grade. :-) Thank you for the project, very well done!
Blatboy Posted November 9, 2015 Report Posted November 9, 2015 (edited) Ahh! I can't believe I missed this. Rats. If there indeed is a wait list for another order, please put me on it. blatboy (PCB+Case) thanks. Edited November 9, 2015 by Blatboy
lukas412 Posted December 18, 2015 Report Posted December 18, 2015 I'd like pcb+case if there's another run. Looks amazing!
Hawkeye Posted December 18, 2015 Report Posted December 18, 2015 Ok, you've always had me convinced, also in for pcb+case, if you do another run, thx for all the work! :) Many greets, Peter
u-link Posted December 27, 2015 Report Posted December 27, 2015 Please put me on the waiting list for a case and a PCB, too.
synaptech Posted January 13, 2016 Report Posted January 13, 2016 (edited) +1 for me Waitlist (8 total) ======== taximan pcb+case blatboy pcb+case Macotronic pcb+case lukas412 pcb+case Hawkeye pcb+case u-link pcb+case nebula pcb+case synaptech pcb+case Edited January 13, 2016 by synaptech Updated waitlist
Phatline Posted January 14, 2016 Report Posted January 14, 2016 ya me too again, pcb only Waitlist (9 total) ======== taximan pcb case blatboy pcb case Macotronic pcb case lukas412 pcb case Hawkeye pcb case u-link pcb case nebula pcb case synaptech pcb case Phatline pcb
Gidien Posted January 20, 2016 Report Posted January 20, 2016 Me too for PCB only Waitlist (10 total) ======== taximan pcb case blatboy pcb case Macotronic pcb case lukas412 pcb case Hawkeye pcb case u-link pcb case nebula pcb case synaptech pcb case Phatline pcb gidien pcb
Karg Posted January 20, 2016 Report Posted January 20, 2016 (edited) Me too PCB+Case Waitlist (11 total) ======== taximan pcb case blatboy pcb case Macotronic pcb case lukas412 pcb case Hawkeye pcb case u-link pcb case nebula pcb case synaptech pcb case Phatline pcb gidien pcb Karg pcb case Thanks a lot for your hard work!!! Edited January 20, 2016 by Karg added table 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now